Amber - Page 2
Shielding guitar cavity to eliminate noise
I still had copper adhesive tape from the modification to my 1st guitar so i started to shield the cavities.
I still had copper adhesive tape from the modification to my 1st guitar so i started to shield the cavities.
Luckily i still had enough tape to shield the completely the zone for the pickups and the cavity for pots etc only the input jack are not shield since not enough tape to do it. Around 2 hours to completely do the shielding.
Later on will try to install the studs and inserts for the bridge.
Later on will try to install the studs and inserts for the bridge.
After some research on how to insert them, it comes down to use a Press machine, using a hammer witch sounds terrifying since you can insert it badly or hit the guitar body in the process and the scientific method off placing the inserts in the freezer for some hours so that the metal contracts due to the low temperature to allow it to be inserted in the per-drilled holes.
1st Page - Previous Page - Next Page - Last Page
1st Page - Previous Page - Next Page - Last Page