Amber - Page 7
Scratch Plate and Neck adjusting
The fix on the strap lock worked nicely so that’s one problem solved.
Received the scratch plate and tremolo plate cover.
The fix on the strap lock worked nicely so that’s one problem solved.
Received the scratch plate and tremolo plate cover.
Already installed the pickups and 5 way blade switch in the plate, the plate needs its edges to be changed the bridge on this guitar needs more space and the neck pocket is also not matching.
Original Fender plate but body not original so it needs to meet the blade.
Sharp knife and its done, the neck pocket on the body was slightly enlarged on one off the edges, on my previous attempt to fit the neck in body with the plate and screws resulted in the neck been raised by the screws, what was happening was the screws where slightly making some force on the walls off the drilled threaded holes, so the neck was not perfectly aligned causing it to go up a lot, with this test there was only a very small gap left between the neck and the body, in the past it was a lot more larger and that was when i had clamp the neck down when screwing it, this time i did not clamp down the neck.
1st Page - Previous Page - Next Page - Last Page
Sharp knife and its done, the neck pocket on the body was slightly enlarged on one off the edges, on my previous attempt to fit the neck in body with the plate and screws resulted in the neck been raised by the screws, what was happening was the screws where slightly making some force on the walls off the drilled threaded holes, so the neck was not perfectly aligned causing it to go up a lot, with this test there was only a very small gap left between the neck and the body, in the past it was a lot more larger and that was when i had clamp the neck down when screwing it, this time i did not clamp down the neck.
1st Page - Previous Page - Next Page - Last Page