Page 8 - Nazgul Bling
Original tuning pegs are installed, new locking nut that's part off the new tremolo bridge, the old locking nut was in black and slightly smaller than this one, one off the holes did not match and it was previously secured using standard wood screws instead off the ones supplied with the nut.
The repair on this section blended in.
The neck was also stained, but i used True-Oil for finish, instead off the Wudtone finish. I am still waiting to apply the Satin Finish on top off the true oil, since you need to wait 7 days.
The control cavity with the ebony reinforcement, i had to make the drilling for the 5 way by hand and leveled it to same height off the surrounding wood.
Where's my sun glasses? There's a 5 way blade in there, 1 volume pot and 1 tone pot in there i know! CTS Pots witch are bigger than the Neutrik ones used in the past, the volume pot the one closer to the 5 way was to close to the edge off the control cavity, those pots where really small and CTS are the really big, so the hole had to be enlarge on one side to fit the new pot, i probably still need to reinforce it so the control does not wobble.
Don't have yet the tremolo parts, next stage will be making the neck Satin, checking the fretboard and frets, installing the bridge when the other parts arrive and start wiring this thing up. Also i still did not get the pickups i am going to get Nazgul/Sentient since i think for the woods would be a good match.
1st Page - Previous Page - Next Page - Last Page
1st Page - Previous Page - Next Page - Last Page