Page 11 - The Nazgul Wiring
The Frets ends where finally shaped, they where also very sharp like the fretboard. Frets where cleaned and given a hand polish.
The initial wiring off the guitar is done, whats left is when i get the pickups wiring them in.
Initial started wiring from a different diagram so i had to unsolder stuff, and re-solder them back in the wright place. Also this diagram the pots are facing the same direction, usually its represented with the solder points facing the same direction. So when wiring i had to take in account that i wanted the solder points facing the same direction to be more easy to solder but adjust the the wiring to the correct place.
The big part off the wiring is done, the other part should be fast to do. I left one extra wiring soldered to ground on the volume pot, when i buy the pickups is just wiring the ground on both off them to that wire, and wiring the pickups to the 5 way. Tried to add one ground wire to the aluminum shielding but that did not worked well, even in copper is not very good.
1st Page - Previous Page - Next Page - Last Page
1st Page - Previous Page - Next Page - Last Page